single-phase auto transfer switch / switched pdu 1.9kw 20a 120v, 1u horizontal rackmount, 16 5-15/20r outlets, 2 l5-20p / 5-20p inputs model number: PDUMH20ATNET description tripp lite switched ats / auto transfer switch provides a redundant power option for single-corded network devices. dual input cords support separate connection to primary and secondary power sources. the ats will normally maintain continuous output to all outlets as derived from the primary input cable. if the primary power source becomes unstable or fails altogether, the ats will switch over to the secondary power source until the primary input is restored and stable. switched pdu features include individually controllable output receptacles and built-in network interface. super-fast switchover between primary and secondary power sources occurs within milliseconds. ats functionality is supported by any two compatible ac power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. enables fault tolerant hot-swappable ups protection when used with a single ups and fully redundant ups protection when each cord is connected to a separate ups system. in a two-ups environment, the primary input cable must be supported by a full time sine wave ups with zero transfer time. tripp lite smartonline series is highly recommended for use as the primary ups in a two-ups application. ats configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. on-board ats processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. front input led's display primary or secondary power availability. features 120v 20a power distribution unit (pdu) with auto-transfer switch (ats) and switched outlets (agency de-rated to 16a) ats features provide redundant power for critical network equipment with a single input power cord switched pdu features enable programmable or real-time control of individual outlets via built-in network interface visual meter reports output power consumption in amps 16 switched nema 5-15/20r outlets; 1u horizontal rackmount form factor; 14.5 in. / 36.8 cm depth two nema l5-20p inputs (includes two 5-20p adapters) connect to separate primary and secondary inputs ats normally maintains output sourced from the primary input; as primary input power fails or becomes unstable, the ats will switch to power equipment highlights single phase 20a 120v auto transfer switch / ats pdu enables redundant-power option for single-corded network devices separate primary & secondary inputs connect to any two compatible power sources 1u horizontal rackmount; 2 l5-20p / 5-20p inputs; 16 5-15/20r outlets individually switched outlets, network interface and 2 digit visual current meter applications ats pdu systems provide a redundant power option with individual outlet control for single-corded network devices package includes pdu with attached l5-20p input power cord detachable c19 to nema l5-20p 12 ft/3.6m secondary input cord two nema l5-20r to nema 5-20p plug adapters installable 1u mounting brackets user manual with warranty information 1 / 5
from the secondary input until power on the primary input is restored and stable ats configurations enable hot-swappable ups protection when used with a single ups and redundant ups protection when each input is connected to a separate ups system (in a two-ups environment, the primary input cable must be supported by an online ups similar to tripp lite smartonline) advanced ats configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported on-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source 2-7 millisecond transfer time between primary and secondary inputs dhcp/manual configuration support; supports http, https, poweralert network management system, smtp, snmpv1, snmpv2, telnet, ssh, ftp, dhcp, bootp, ntp protocols compatible with optional envirosense temperature monitor outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the pdu is first energized front panel leds confirm power availability on primary / secondary inputs and each output receptacle taa compliant version available - order tripp lite PDUMH20ATNETaa specifications overview pdu type auto-transfer switch; switched output output capacity details 1.9kw (120v input), 2.0kw (127v input), 1.6kw (100v input); 20a maximum (agency de-rated to 16a continuous) frequency compatibility 60 hz output va 2400 output nominal voltage 100-127v nominal, single phase outlet quantity / type 16 nema 5-15/20r outlet type nema 5-15r, nema 5-20r customized load management receptacles 16 individually controlled load management receptacles input pdu input voltage 100; 120; 127 maximum input amps (a) 20 maximum input amps (a) details agency de-rated to 16a continuous pdu plug type nema 5-20p; nema l5-20p input cord length details both input cables are 12 ft / 3.6m - the cables each terminate to a l5-20p locking plug on the input side. two included 6 inch plug adapters convert the locking plugs to nema 5-20p plugs phase single-phase leds alarms & switches 2 / 5
front panel leds 16 front panel leds display power on - off status for each outlet, plus 2 leds for power status on each input line cord. digital current meter display shows the amount of power consumption in amps for entire output of pdu. physical shipping dimensions (hwd/in) 6.25 x 22.5 x 23.5 shipping dimensions (hwd/cm) 15.9 x 57.2 x 59.7 shipping weight (lbs) 16.4 shipping weight (kg) 7.4 unit dimensions (hwd/in) 1.75 (1u) x 17.5 x 14.5 unit dimensions (hwd/cm) 4.44 x 44.4 x 36.8 unit weight (lbs) 12.2 unit weight (kg) 5.5 material of construction steel style rackmount form factors supported 1u rackmount pdu form factor horizontal (1u, 2u, etc) environmental relative humidity up to 95% (non-condensing) communications snmp compatibility yes, via pre-installled snmpwebcard . provides remote monitoring, outlet control, and automatic power management configurations. special features appearance black 1u rackmount steel chassis certifications taa compliant option taa compliant version available - order tripp lite PDUMH20ATNETaa certifications tested to ul 60950 (usa, canada), class a (emissions), nom (mexico), rohs complaint warranty product warranty period (worldwide) 2-year limited warranty related items optional products model number description qty. 3 / 5
wext3-pdu-atnet 3-year extended warranty - for switched pdus ending with atnet 1 wext5-pdu-atnet 5-year extended warranty - for switched pdus ending with atnet 1 envirosense monitors temperature, humidity and contact-closure inputs. (requires snmpwebcard or switched pdu.) 1 srswitch magnetic door switch kit (2-pack for front and rear doors; requires envirosense.) 1 p007-002 2-ft. heavy-duty 14awg power cord (iec-320-c13 to nema 5-15p) 1 p007-006 6-ft. heavy-duty 14awg power cord (iec-320-c13 to nema 5-15p) 1 p007-010 10-ft. heavy-duty 14awg power cord (iec-320-c13 to nema 5-15p) 1 p010-012 12-ft. 18awg power cord (nema 5-15p to iec-320-c13) 1 p022-001 1-ft. 18awg power extension cord (nema 5-15r to nema 5-15p) 1 p023-001 1-ft. 14awg power adapter cord (nema l5-15r to nema 5-15p) 1 p034-010 10-ft. 14awg heavy duty power cord ( iec-320-c19 to nema 5-15p) 1 p036-002 2-ft. 12awg heavy duty power cord (iec-320-c19 to iec-320-c20) 1 p036-006 6-ft. 12awg heavy duty power cord (iec-320-c19 to iec-320-c20) 1 p043-002 2-ft. 10awg heavy duty power cord with 20 amp breaker, (nema l5-30p to nema l5-20r) 1 p045-010 10-ft. 12awg heavy-duty power cord (iec-320-c19 to nema l5-20p) 1 p047-002 2-ft. 14awg heavy duty power cord (iec-320-c19 to iec-320-c14) 1 p047-004 4-ft. 14awg heavy duty power cord (iec-320-c19 to iec-320-c14) 1 p047-006 6-ft. 14awg heavy duty power cord (iec-320-c19 to iec-320-c14) 1 p047-010 10-ft. 14awg heavy duty power cord (iec-320-c19 to iec-320-c14) 1 p049-010 10-ft. 12awg heavy duty power cord (iec-320-c19 to nema 5-20p) 1 srcableduct1u 1u horizontal cable manager (finger duct with cover.) 1 srcablering1u 1u horizontal cable manager (flexible ring type.) 1 srcablering2u 2u horizontal cable manager (flexible ring type.) 1 more information, including related products, owner's manuals, and additional technical specifications, can be found online at: http://www.tripplite.com/sku/PDUMH20ATNET . 4 / 5
? 2014 tripp lite. all rights reserved. all trademarks are the sole property of their respective owners. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. photos may differ slightly from final products. 5 / 5
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: tripp lite: ? PDUMH20ATNET
|
